Do you have a question about the Technics RS-TR575 and is the answer not in the manual?
Track System | 4-track, 2-channel stereo |
---|---|
Tape Speed | 4.8 cm/s |
Type | Double Cassette Deck |
Motor | DC Motor |
Output | Line Out, Headphones |
Dimensions | 430 x 132 x 250 mm |
Inputs | Line in |
Outputs | Line out, Headphones |
Frequency Response (Normal Tape) | 30 Hz - 16 kHz |
Frequency Response (CrO2 Tape) | 30Hz to 16kHz |
Details technical specifications for the cassette deck system, including heads, motors, and frequency response.
Provides overall unit specifications including dimensions, weight, power supply, and consumption.
Procedure for ensuring electrical safety before returning serviced equipment.
Wiring instructions for US, Canada, and similar regions, including AC outlet usage.
Wiring instructions for European, Asian, and other regions, including voltage selector use.
Instructions for connecting and using headphones for audio output.
Details on operating the unit using a compatible Technics amplifier or receiver remote.
Explains the Dolby B and C NR systems for reducing tape hiss.
Explains the HX Pro system for improved high-frequency recording range.
Describes the feature that automatically detects tape type for optimal recording.
Steps to activate and interpret the unit's self-diagnostic function for troubleshooting.
Step-by-step guide for replacing the friction gear assembly.
Detailed procedure for replacing the drive rack component.
Instructions for removing and replacing the playback/record head.
Guide for replacing the plunger mechanism component.
Procedure for setting overall gain and frequency response via EEPROM calibration.
Adjusting the head alignment for optimal signal playback.
Calibrating the tape playback speed for accuracy.
Measuring and verifying playback gain levels.
Testing and confirming the audio frequency response.
Measuring the erase head current for proper tape erasure.
Verifying overall audio performance after adjustments.