Technics RS-TR165 Operating Instructions

Edit-Recording
2
3
pause|
|stop
4
synchro start 5
{
2
3
A
__ Changes can be made while recording from __
one tape to another
Recording
indicator
review
|
cue
Playback indicator
Reverse-mode
indicators
Switch ON the amplifier.
timer
Switch OFF the timer switch.
power
Switch ON the power switch.
eject
Press
and
insert
the
cassette
for
recording
into deck 2. Then insert the cassette for
playback into deck 1. =
(The
part
of
the
cassette
where
the
tape
fox]s
is exposed should face downward.) ==
ud
reverse
mode
Select the appropriate reverse mode.
[The
reverse-mode
indicator
(‘=="
or
“c>")
will
illuminate.]
+= Select this mode to record on one side only.
The
recording
will
stop
at
the
end
of
one
side
of
the
tape
depending
which
side
was
selected.
C)
Select
this
mode
to
record
on
both
sides.
The
recording
will
be
made
on
side
‘‘B"
after
recording
on
side
''A’’.
The
tape
will
stop
at
the
end
of
side
“B”.
(When
the
playback
in
the
“A”
side
by
deck
1
has
finished,
tape
movement
in
deck
1
will
stop
and
deck
2
will
change
to
the
recording
stand-by
mode.)
speed
Select the speed at which the recording will
be made.
[The
edit-recording
tape-speed
indicator
(“x
1"
or
x2”)
will illuminate.
]
x 1: For operation at the normal tape speed
x 2: For operation at the high tape speed
==
Edit-recording
tape-speed indicators
vA synchro start|
Press the synchro-start button.
(The recording will begin.)
In order to avoid mis-operations later, be sure to switch
OFF the edit-recording tape-speed button (the edit-record-
ing tape-speed indicator illumination stops) after the edit-
recording has finished.
r Notes:
¢ Edit-recordings cannot be made from deck 2 to deck 1.
e Recording level as well as equalizer effects and Dolby noise-
reduction effects are recorded on to the tape in deck 2
exactly as they were originally recorded on the tape in deck
1
¢ Because noise-reduction efects cannot be heard in the
playback sound, when listening to a tape recorded by
employing
noise-reduction
use
the
treble
tone
control
on
the
amplifier to reduce the treble range.
¢ While an edit-recording is in progress, you can enjoy some
other source. Select the desired sound source by using
the input selectors on the amplifier, and start the
performance.
HiTo
temporarily
stop
an
edit-recording
|pause| Press the pause button.
(The playback indicator will begin flashing, and playback will
continue on deck 1.)
To resume recording, press the playback button corresponding to
the side of the tape being recorded upon.
HiTo
stop
an
edit-recording
stop|
Press
the
stop
button
of
deck
2.

Technics RS-TR165 Specifications

General

Brand	Technics
Model	RS-TR165
Category	Cassette Player
Language	English