Need help?Do you have a question about the Technics SA-AX710 and is the answer not in the manual?
General| Input Sensitivity | 150 mV (line) |
|---|---|
| Input sensitivity (MM) | 2.5 mV |
| Signal to noise ratio (MM) | 80dB |
| Signal to noise ratio (line) | 100 dB |
| Power Output | 100 W per channel (8 ohms) |
| Frequency Response | 5 Hz - 100 kHz |
| Signal-to-Noise Ratio | 100 dB |
| Tuning range | FM: 87.5 - 108 MHz, AM: 530 - 1600 kHz |
| Channel separation (line) | 60 dB |
| Speaker load impedance | 4 - 16 ohms |
| Video Connections | composite |
To Next Page
