Technics SA-DV250 - Returning to Normal Display; U70 DVD;DECK Code Return Procedure; F61 Code Return Procedure

http://servis-manual.com/
7.2 To return to the normal display
TOP PREVIOUS NEXT
1. For U70 DVD/U70 DECK
¡
Press an any operation button on the tuner/amplifier.
¡ To re-display the code, switch the power off (POWER STANDBY button), and then
switch power back on again.
2. For F61
¡ If F61 is displayed, the power will automatically be switched off and the standby
indicator will light up.
¡
F61 will be displayed for 3 seconds, and then the clock will be displayed.
¡ To re-display the code, switch the power on. F61 will be re-displayed, and then after 3
seconds the clock will be displayed and the power will automatically switch off.
@
TOP PREVIOUS NEXT