Technics SA-GX170

POWER TAPEIDCC
Before operation, set VOLUME to the “0” position.
a poweR Press POWER to switch on
ans) the power.
"SPEAKERS. Press A and/or B to select
A 8B
the speaker system(s) to be
C)) used.
A and B refer to the speaker terminals
at the rear of the unit.
Iluminates
If the button is pressed once more, the
indicator will switch off and no sound
will be heard from the speakers.
VOLUME VCR 2
[=
[-\\
T=
]Press
to
select
the
desired
source.
VCR 1: To watch video tapes (VCR 1)
VCR 2: To watch video tapes (VCR 2)
TAPE/DCC: To listen to tape or digital
compact cassette (DCC)
The tape monitor in-
dicator will appear.
(See below.)
CD: To listen to compact discs
TUNER: To listen to radio broadcasts
PHONO: To listen to phono discs
Start the desired source.
(Refer to the appropriate operating in-
structions for details.)
volume Turn VOLUME to adjust the
volume level.
After listening is finished
Be sure to reduce the volume level, and switch the power to the
standby condition by pressing POWER.
When tape monitor indicator illuminates or is
flashing (approx. 3 seconds)
This indicates that the tape monitor function of this unit is ON.
To listen to sources other than a tape or DCC, be sure to turn off
the indicator by pressing TAPE/DCC [MONITOR].
IIluminates or is flashing
—— UAPE MONITOR)
Il