Direct access tuning
Specify the frequency using the numeric buttons to directly tune
to the desired broadcast station.
5 1
2 FM 3
AUTO/MONO
!r-q
I........ i _ .... !,I,;0,
I
0
66 !:
C)-
L_____J'
Press TUNER.
TUNER
IIII I
I._1I._l, I ..,
L BANO J Press BAND to select "FM" or "AM". _ T III1,11I I I I ...
Illuminates
[_ ........................................................................................................................
DIRECTTUNING Press DIRECT TUNING. [-- -- -- --
While' cursor display is [QEI FM /1\_---I/ M,=
[. ^ J flashing (approx. 10
"_ ,__conds)
i-TI3-1_c_] Press the appropriate numeric but- If the desired FM frequency is 107.9
MHz
tons to enter the frequency.
If the frequency has been input correctly, the fre-
quency display will blink. [] "-'* [] "-* [] -_ []
1. If no button is pressed while the cursor display
is flashing, the display will return to the frequen-
cy which is currently being received. To re-
specify the frequency, repeat the procedure
from step 3.
2. If the frequency has not been input correctly,
an error message will be displayed. In this
case, re-enter the frequency.
rQUARTZ
LOCK II II I I__I
(33 rM I I._1 I, _1
Ium nates when tuned
MHz
When the FM stereo broadcast is received:
This unit will automatically switch to FM stereo reception and the
FM stereo indicator will illuminate.
OUARTZ
L_K STiREO ' ' ' I ' I. I
I I._1 I, _1 ..=
Illuminates
If noise is excessive in the FM stereo mode
Press FM AUTO/MONO. (The FM stereo indicator will switch off.)
The broadcast will be monaural, but noise will be reduced. If the
button is pressed once more, stereo mode will be resumed.
12
To Next Page
Loading...
