Technics SC-HD51 User Manual

RAK-CH193WH
= ues ges oy
OO TSsss TDOOSH nce
BH \Ssocal}-O
RAK-CH215WH
Compact disc operations
Roce fo iil tae discs |For SGHDSI
Program play
by remote control only
This function allows you to program up to 24 tracks.
il Press CD.
2. Press PROGRAM.
“PROGRAM” will light.
Ie} Press the numeric button(s) to select the track
you want to play in the desired sequence.
To select a two-digit track:
Press 210 and then the tivo numbers you want.
Repeat step 3 until you have programmed all
the tracks you want.
Press ®.
Play will start in the programmed sequence.
When all the programmed tracks have been played, the CD
player will stop automatically.
To cancel program play mode:
Press PROGRAM.
“CLEAR” will appear on the display for approximately 1 second and
all the programmed tracks will be cancelled.
When “FULL” appears:
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
When “——:—~” appears:
The total playing time of the programmed tracks has exceeded
99 minutes 59 seconds, or you tried programming track number 25 or
more. In either case, you can still program and play the disc.
You can do the following during program play.
®Check program contents
Press <q or »P] while play is stopped. Every time you press one
of the buttons, the track No. and program No. are shown on the
display.
®Add to the program
Repeat step 3.
®Cancel entries
A specific track only:
@) Press CANCEL. “CANCEL” will light.
() Press the numeric button(s) of the track you want to cancel, or
press <q or PP] to select the track you want to cancel and then
press CANCEL.
@ Press CANCEL once again. “CANCEL” goes out.
All tracks:
Press PROGRAM, or press il while play is stopped.
For your reference:
As long as you do not clear the program, the system will retain the
programmed tracks in memory for as long as 2 weeks while the
system is OFF.

Technics SC-HD51 Specifications

General

Brand	Technics
Model	SC-HD51
Category	Speakers
Language	English