Technics SC-HD51 User Manual

g operations
Recordin«
i 7 POWER
Ss.
STANDBS__DN
ee es enpeavpte eave aees
eoeeoerseneurns=eeeeneee
, oss
= AOPEN
25) CLOSE
ec] > (oy
a :
{ao h
een epsve# spe aero ep eee
Recording from compact discs
Rees
- Normal recording
mn
bl Switch on the power.
2 Press 4 OPEN/CLOSE on deck, and then insert
the tane with the exnosed part of the tane fac- =wawe = rr PE
ing inward.
Insert the cassette tape until it touches the back of the compart-
ment.
Press & OPEN/CLOSE once again to close the holder.
3 To record in Dolby B NR.
Press DOLBY NR and check “DO” is displayed.
Press REV MODE to select the reverse mode.
=: Oneside will record, and then the tape will stop automat-
iealiy at the tane end
Btotese F 4h SAL ee ee
37): Both sides will record (forward side— reverse side), and
then the tape will stop automatically at the tape end.
cu™>: Same as above (When you press @ REC PAUSE, “cI7™>”
msl) ho arttamahnallhy: euritched avar ta fe’)
VV ALE AR CALERA ARITERAS CLL POPPE ALIN UY A lg ls fe
a
5 Set the tape travel direction.
To change the tape travel direction, first press <4 or ® on the
cacesatin deck then
LQAOSOCLLE UCLA, LILCLL a,
: Recording from the forward side
“4: Recording from the reverse side
V4 Incart CNec int
| <F SEAL Whew ERE
(For details, see page 19,
Press @ REC PAUSE to put the cassette deck
into ithe recording siandby mode.
REC PAUSE indicator lights.
The playback indicators above <4 or ® will start flashing.
Press » on ihe CD changer.
Recording will begin from the first track of the disc shown on
the display.
To record from disc 1, press DISC 1.
oo
Approximately 4 seconds after the CD finishes playing, the cassette
deck will automatically put recording on standby.
To stop recording:
eTo add a 4 second silent interval before stopping
Press Mi on the CD changer.
Te hee ees Be EN oe SSA Me 8 Ue Ne eee ene See
Le Casserle Cec wlll SU DIL Te PECs Stalliiby Sictle.
eTo stop recording withoui a silent interval
Press fl on the cassette deck.
The CD changer does not stop.
To record programmed tracks FJ
@ Priorm steps 1-6 above, and then press CD on the remote control.
@) Press PROGRAM on the remote control.
) Press DISC on the remote control.
@) Select the CD from the remote control with buttons 1-3.
(5) Select the track number from the remote control with the numeric
button{s).
©) Repeat steps © through ©) until programming all tracks (max.
24 tracks}.
@) Perform above steps 7 and 8.

Technics SC-HD51 Specifications

General

Brand	Technics
Model	SC-HD51
Category	Speakers
Language	English