Technics SL-1200M7L Owner's Manual

Getting started
English
(15)
15
0
1
3
2
Anti-skating
1
Turn the anti-skating control to
adjust it to the same value as the
stylus pressure control.
2
Turn the balance weight to adjust
to the appropriate stylus pressure
for the cartridge.

The stylus pressure control will turn
together with the balance weight.

Turn until the center line points to the
appropriate stylus pressure.
Center line
Balance weight
Hold here
to turn
Turns
together

For stylus pressures 3
g
and above, adjust
anti-skating control to “3”.

When performing scratching (including
reverse play), adjust the anti-skating control
depending on the scratch movements to
perform to reduce skating.
Note
SL-1200M7LP.indb15SL-1200M7LP.indb15 2022/02/1612:14:432022/02/1612:14:43

Technics SL-1200M7L Specifications

General

Drive Method	Direct Drive
Type	Manual Turntable
Wow and Flutter	0.025% WRMS
Tonearm Type	Universal Static Balance
Tonearm Effective Length	230 mm
Tonearm Overhang	15 mm
Power Consumption	8 W
Motor	Brushless DC motor
Turntable Speeds	33 1/3, 45 rpm
Platter	Aluminum die-cast, 332 mm diameter
Cartridge Weight Range	5.6 - 12.0 g 14.3 - 20.7 g (including headshell)
Terminals	Ground Terminal x 1
Dimensions	453 x 353 x 169 mm
Weight	9.6 kg
Starting Time	0.7 sec (33-1/3 rpm)
Signal-to-Noise Ratio	78 dB (DIN-B)
Tracking Force Range	0-4 g
Power Supply	AC 120 V, 60 Hz