Need help?Do you have a question about the Technics SL-1900 and is the answer not in the manual?
General| Drive method | Direct Drive |
|---|---|
| Motor | Brushless DC motor |
| Turntable platter | Aluminum die-cast |
| Speeds | 33 1/3 and 45 rpm |
| Wow and flutter | 0.03% WRMS |
| Effective length | 230 mm |
| Overhang | 15 mm |
| Cartridge | Not included |
| Rumble | -70dB (DIN B) |
| Offset angle | 22 degrees |
| Tonearm type | Static balance S-shaped tonearm |
Procedure to balance the tonearm horizontally for proper playback.
How to set the correct downward force for the stylus tip.
Setting the anti-skating mechanism to prevent stylus damage.
Step-by-step guide for playing records manually.
Instructions for initiating playback automatically.
How to start, stop, and manage automatic tonearm return.
Fine-tuning tonearm movement for start and return cycles.
Using pitch controls to set precise turntable rotation speeds.
Step-by-step guide for replacing the stylus cartridge.
Instructions for replacing the entire cartridge and connecting wires.
To Next Page
