RQT7114
11
Basic operations
Display indicator
Displaying the remaining time
While playing a CD, SD Memory Card
Press [•REMAIN –AUTO CUE]
•“REMAIN” appears and the remaining play time of the track is
displayed.
•Pressing again will return the time display to its original state.
•When you are playing a MP3 file from a CD-R or CD-RW the
remaining play time will not be displayed if you press [•REMAIN
–AUTO CUE].
•When there is less than 30 seconds of time remaining, you are
notified by the flashing time display. With a MP3 file from a CD-
R or CD-RW, the time display flashes if there is less than 7 sec-
onds of time remaining. However, depending on the operation,
the flashing indicator in the display may not appear.
Changing the display angle
You can rotate the display angle corresponding to the way the unit is
setup.
Press [•DISPLAY ANGLE –FUNCTION] to select the dis-
play angle
•The angle of the display rotates 90 degrees clockwise each time
the button is pressed.
•The setting remains in memory even when the power is turned
off.
Adjusting the display contrast
1. Press and hold [•DISPLAY ANGLE –FUNCTION] for
about 2 or more seconds until the display changes
•“CONTRAST” is selected in the display.
2. Press [– ], [+ ] to adjust the display contrast
•Press [– ], [+ ] to change the display to the desired con-
trast (adjustable range: 1-100).
•If no buttons are pressed for more than 5 seconds, the time dis-
play returns to its original state.
•The setting remains in memory even when the power is turned
off.
Selected play media indicator
: Indicates CD is selected
: Indicates SD is selected
Track number indicator
When using CD, SD Audio: Total number of tracks and the track
being played is displayed
When using CD-R, CD-RW MP3 files:
Total number of tracks and the track
being played within the album is dis-
played
Current track position indicator
Change in tempo rate indicator
Auto Cue indicator
: Indicates Auto Cue is on
Cue bank indicator
REALTIME REC indicator
:
Indicates the sample pad is in REALTIME REC operation
Beats per minute (BPM) indicator
Number of beats per minute, indicating track speed
Depending on the music, the BPM may not be detectable, or
may take time to be displayed.
Play time (Minutes, seconds, frames), remaining time
(CD, SD audio) indicator
Remaining time (REMAIN) indicator
Displayed only for CD, SD audio
MP3 album number indicator
Indicated when using MP3 files
CD-MP3 (CD-R, CD-RW MP3 file) indicator
Displayed when using CD, SD audio
Displayed when using MP3 files on CD-R and CD-RW
To Next Page
Loading...
Need help?
General
