RQT7114
12
Basic operations
1
3
5
4
2
Playing a CD or SD Memory Card (basic play)
Playing CD-R and CD-RW discs
This unit can play CD-DA formatted CD-R and CD-RW discs.
CD-DA formatted discs must be finalized at the final point of record-
ing using a CD designed for music recording. CD-R and CD-RW discs
containing MP3 files can also be played. However, play may not be
possible on some discs depending on the state of recording.
Finalizing makes audio recordings compatible for play on equip-
ment that supports play of CD-R and CD-RW discs that are de-
signed for music recording.
Adjusting volume when
using the headphones
Turn [VOLUME]
Auto Cue function (TURNTABLE mode only)
When one of the media has been set, or when a track has been
skipped, or when advancing to the next song while playing, the auto
cue point automatically sets and pauses at the point just before audio
begins, skipping the null sound area at the beginning of the track.
Auto Cue is set to off as default.
Rear panel
Front panel
With the label
face up
With the label
face up
SD Memory Card
Front panel
SD ACCESS
indicator
Auto Cue indicator
Auto cue point setting indicator
Turning on Auto Cue
Press [•REMAIN –AUTO CUE] for more than 2 seconds
•The display indicator changes from “ ” to “ ”
•Each time you press and hold the button:
(Auto Cue is on) (Auto Cue is off).
•The segment without sound that is skipped is a maximum of 15
seconds from the beginning of the track.
•The on or off setting remains in memory even when the power is
turned off. Additionally, the setting stored to memory for each
CD or SD Memory Card is restored once the set media is re-
inserted.
To Next Page
Loading...
Need help?
General
