RQT7114
5
Before use
Main features
This direct drive digital turntable is designed for DJs to play digital media (CDs and SD audio) giving an analog-like feeling. Having the feeling of an
analog turntable, this unit delivers digitally robust functions and performance realizing a new style of play.
SAMPLE PADS
•You can store up to 4 audio segments to memory.
•You can use for dual play for up to 2 sample pads,
and use for switching between one shot and loop
play.
CUE PADS
You can store 4 cue points to
memory. Play can be started in-
stantly from one of those cue
points.
LOOP play
You can set the IN and OUT
points and play as a loop.
Strobo Dot Reflectors
You can use the red strobo illu-
minator to check changes in
tempo.
CUE
•Setting the cue point
Store the cue point to
memory.
•Back cue
During play you can instantly
return to the set cue point
and the unit waits in the
pause state.
SD CARD LOAD and SAVE
You can SAVE and LOAD sample
pad, cue point panel data etc. to
the SD Memory Card.
VINYL SIM
You can simulate sound simi-
lar to an analog player.
DYNAMIC FX
You can transform sound by
using the platter.
FORWARD and REVERSE
The rotation direction of the
platter can be reversed by
switching the play direction
switch to REVERSE or FOR-
WARD.
Platter
Play media is synchronized
with platter movement.
TEMPO
•You can control the play speed
(tempo).
•You can adjust the tempo to
4 levels of settings between
± 8 and ± 50 using the
RANGE button.
•You can instantly return to
normal playing speed using
the RESET button.
•By using the PITCH LOCK
button the pitch is held even
if the tempo is changed.
PLAY SELECT
Selects CD or SD play.
Control panel
FREE WHEEL
You can switch the platter to
freewheel.
Platter slip surface
Use your hand to turn the plat-
ter slip surface for scratch,
brake and spin DJ play.
CD slot (Slot in type)
SD Memory Card slot
Front panel
Rear panel
TURNTABLE
Mode for DJ play.
CD PLAYER
Mode for use as an audio
player.
To Next Page
Loading...
Need help?
General
