- Important safety notice:
- Components identified by mark have special characteristics
important for safety.
- Furthermore, special parts which have purposes of fireretardant
(resistors), high-quality sound (capacitors), low-noise (resistors),
etc. are used.
- When replacing any of components, be sure to use only
manufacture’s specified parts shown in the parts list.
- The parenthesized indications in the Remarks columns specify the
areas. / Parts without these indications can be used for all areas.
- (EB): SL-DZ1200EB
- (EG): SL-DZ1200EG
- (EP): SL-DZ1200EP
- (GN): SL-DZ1200GN
- (PP): SL-DZ1200PP
- Capacity values are in microfarads (uF) unless specified otherwise,
P=Pico-farads (pF) F=Farads (F)
- Resistance values are in ohms, unless specified otherwise, 1K=
1,000 (OHM), 1M=1,000k (OHM)
- The marking <RTL> indicates the retention time is limited for this
item. After the discontinuation of this assembly in production, it
will no longer be available.
18.1. Component, Accessory, and Packaging Parts
73
To Next Page
Loading...
Need help?
General
