6. Main features
7. Component part names
8. Operation Checks and Component Replacement
Procedures
- This section describes procedures for checking the operation of
the major printed circuit boards and replacing the main
components.
- For reassembly after operation checks or replacement, reverse the
respective procedures. Special reassembly procedures are
described only when required.
8.1. Checking for the control panel (1) P.C.B. and control panel (2)
P.C.B..
- Check the control panel (1) P.C.B. and control panel (2) P.C.B. as
shown below.
9
To Next Page
Loading...
