Technics SL-EH60 Service Manual

SL-EH60
2X Take care Apply the tape between the chassis and
not
to
contact
‘
.
. .
to
the
chassis.
traverse
unit
not
to
contact
the
disc
with
chassis.
Chassis
Check the servo P.C.B. (solder side)
Servo P.C.B. as shown left.
1. Replacement for the traverse deck ass’y
Perform the items GED ~ for CD changer removal
(Refer to pages 6 and 7.)
=
Remove the 3 screws.
Unsolder the motor terminals.
Solder Solder J
Servo P.C.B.
GED | Remove the FFC from the connector, and then
remove the servo P.C.B..
Caution:
Insert a short pin into the traverse
unit FFC board.
Refer to “Hnading Precautions for
raverse Deck” on page 2.)
Top of the connector FFC FFC board
v4
i aD > Short pin
=46)=

Technics SL-EH60 Specifications

General

Brand	Technics
Model	SL-EH60
Category	CD Player
Language	English