Technics SL-L3

Procedure
Function/Notes
aaa
@ Repeat program record play
1. After entering the program, press the repeat button.
2. Press the start button.
The repeat indicator illuminates to show that the repeat
mode has been activated.
® All programmed songs will be played repeatedly even if
the repeat button is pressed during play of the last
programmed song. Repeat program record play cannot
be activated after the last song has ended.
@ To play a programmed song again
during program play
Press the program button of the song currently being
played.
—_——_
Record play of the song will be stopped and then resumed
from the beginning.
@ To skip ahead to a programmed song
during program play
Press the program button of the song to be played.
For example, while listening to song 5 in a 5~4—-3--1
program sequence, press program button [1] to hear song 1
immediately.
Press program button [1].
F Hluminates
Illuminate
[GEESE]
ser
onan
gol
Flashes on
Illuminates
es SS es Ss SS
1 2 3 4 5S 6 7 8
eee cee cre eee eee eed
Record play will be stopped and then resumed from the
beginning of the song just entered.
Playing song 5
au 2 (auto-return)
The program/skip indicators of the skipped songs will go
out.
©The programmed songs being skipped will be cancelled,
unless the repeat mode has been activated before
skipping the programmed songs.
M@ Direct song (track) selection
For example, to start record play from song 5:
bd Skip search DAL
Press the forward skip/search button.
(under one second)
Press the program button.
Press the start button.
a
1.
2.
3.
L
Always press the program button before the start
button.
©Be careful to press the forward skip/search button only
for an instant. If it is held down, the search mode is
activated.
elf the search mode is activated, the tonearm will rise. In
this case, press the stop/clear button to return the
tonearm to the rest position.
racks | track 4 | track 3 | track 2 j track 1
Play begins from song 5.
track 6
rack 7
(auto-return)
|
©
|