Delete Play ,°on,,nu.°,
3 DISC2 DISC3DISC4 DISCS
6
4
1 2 3 4 5
6 7 8 9 10
o >1o
5 epeat steps 2, 1
3 and 4 as
desired.
• PLAY
From the remote control
Before operation, follow the steps 1-4 of "Basic
Operating Procedure" on page 9.
In the stop mode, press PROGRAM MODE to
illuminate the delete play indicator.
Skip to step 4 if the disc number display shows the disc
number you want to delete.
Disc number display
I
.1 ). (2_ <1_3;])<E4),. 5;]P I f'_ /") ]
I U
__L - - - omc /-./e.,_ No.
/
2 Press DISC.
5
Repeat steps 2, 3 and 4 until you have com-
pleted the desired entry.
I! you enter non-existing disc(s) or track(s) soon after the
loading drawer isclosed or when it is open, the corresponding
indicator illuminates and the entry is included in the count, tn
the play mode, the changer will cancel the non-existing entry.
If you attempt a 33rd selection, the - FF (full) indication will
be displayed.
3
4
Press the numeric button (1 - 5) to specify the
disc number.
Skip to step 5 if you want to enter only the disc number.
Press the numeric button(s) to specify the
track number.
For example: To select track number 20, press > t0, then 2,
and then 0,
6 Press to start play.
To activate sequential play, press PLAY.
To activate random play, press RANDOM.
To enter additional selections to be deleted during play,
repeat steps 2, 3 and 4.
If you play a disc with the loading drawer open, the changer will
stop when the last track on the current disc finishes playing.
2O
To Next Page
Loading...
Need help?
General
