Front Panel Controls and Functions
l i T I
r "3
©
f
Control section
Numbers with black background (for example _]) ) indicate func-
tions available on the remote control.
Power switch (POWER)
Press ( .11--, m ) to switch the power on.
Press again (a --, 111) to switch the power off.
6_ Remote control signal sensor
(REMOTE SENSOR)
6
(_ Pitch control buttonlindicator (OFFION)
Press to turn the pitch control effect on or off.
When the pitch control effect is on, the indicator illuminates.
(See page 26.)
Pitch control knob (-, +)
This is used to adjust the playback pitch (tempo and pitch of
the sound). (See page 26.)
O ID scan button (lid SCANI )
Press to activate the ID (identify) scan function.
(See page 25.)
®
Tape length button (TAPE LENGTH)
When you attempt to record compact discs to tape, press to
select the tape length so that the changer can then
automatically calculate what tracks fit on each side of the
tape, in a sequential manner. (See pages 32-34.)
Loading drawer
You can load or unload discs when this drawer is open.
® Disc trays (1 -5)
You can load up to five discs, one disc per one tray.
O Search buttons (<1,< SEARCH IN_)
Press to move forward and backward through the tracks on
the disc. (See page 28.)
• Disc buttons (DISC 1-5)
Use to select the desired disc.
With the remote control, by using disc button and numeric but-
ton (1-5). (See page 12.)
• Play button (1_ PLAY)
(See page 9.)
To Next Page
Loading...
Need help?
General
