The display shows the data of the tracks to be recorded as
|ollows:
Number of tracks Tracks to be
to be recorded recorded
_, Remaining time on side A
. . _ BITe i.l." SECll
4
Number of tracks Tracks to be
to be recorded recorded
'-"":-''--711
* 1]) .2) .3) (4]) ._',5_,' B
_, Remaining time on side B
. . . B)(TII I'MIN" _EClI
In this example, disc 5 can be recorded with tracks 1 -5 on
side A and tracks 6-9 on side B of the cassette tape.
4
Press PLAY.
Recording will begin from side A.
When the tracks programmed for tape side A have finished
playing, the changer searches for the beginning of the first
track to be recorded on side B and switches to the pause
mode. When the auto reverse mechanism of the cassette
deck works at the end of side A and the tape switches to side
B, recording for side B starts automatically.
During recording, the changer automatically makes approx-
imately 3-second silent gaps at the beginning of every track
(auto space function).
Depending on the disc, a little sound of the beginning of the
next track may be recorded onto the end of the track.
If a cassette deck to be used has no synchro edit
function
Start recording on the cassette deck at the same time you press
PLAY of this changer.
When the recording for side A is finished, the changer goes into the
pause mode. As soon as the cassette deck switches the tape side
to B, press PLAY of the changer.
When all the programmed tracks on the specified disc finishes play-
ing, the changer will automatically stop. The edit mode will be
cancelled at the same time.
To stop recording
Press STOP and then press the stop button on the
cassette deck.
33
To Next Page
Loading...
Need help?
General
