Technics SU-A900 User Manual

Recording
I S et the tape*monltor button to the Tape-to-tape recordings can be made if two regular tape decks,
"SOURCE” position. or one re 9 ular tape deck and a digital compact cassette deck
(DCC), are connected to the rear panel of this unit.
2 Select the program source to be recorded.
AUX: Set to this position to record from equipment con¬
nected to the “AUX” terminals.
CD: Set to this position to record from compact discs.
TUNER: Set to this position to record from radio broad¬
casts.
PHONO: Set to this position to record from phono discs.
Prepare the tape deck tor recording.
(Refer to the operating instructions for the tape deck for
detailed adjustment of the recording level, etc.)
Note:
Tape deck 1 (first tape deck) is the tape deck connected to the
"TAPE 1" terminals.
Tape deck 2 (second tape deck) is the tape deck connected to
the “TAPE 2” terminals.
To record from tape deck 2 to 1
I S et the tape-monitor button to the
“SOURCE” position.
Press the “TAPE 2” button.
3 Start tape deck 1 for recording and tape
deck 2 for playback.
Start recording, and play back the source.
To record from tape deck 1 to 2
n
Set the tape-monitor button to the
“SOURCE” position.
Press the “TAPE 1” button.
Start tape deck 2 for recording and tape
deck 1 for playback.
■ To directly select the source for recording
The desired source can be selected directly by using the input
selector buttons ( (g) (§)) located inside the panel.
Set the tape monitor to “TAPE 1 n or “TAPE 2” and the
monitor switch on the tape deck to “TAPE"
TAPE 1: when recording on tape deck 1 (first tape deck)
TAPE 2: when recording on tape deck 2 (second tape deck)
■ To check the sound recorded
With a tape deck with 3 heads, It is possible to check the sound
recorded on the tape.

Technics SU-A900 Specifications

General

Brand	Technics
Model	SU-A900
Category	Amplifier
Language	English