PartVII MIDI
INPUTMODE
Set to the SINGLE mode when you wish to receive
data using only one channel. Set to the NORMAL
mode to receive data on multiple channels.
1. Use the MIDI button to select OTHERS.
2. In the RHYTHM SELECT section, use the
NORMAL and SINGLE buttons to select the
type of receive mode.
RHYTHM SELECT
OMARCHO:1'JI11!YOWALTZOSWING,OSWING2OOIXIEO~lL~ZOLATIN1OLATlN2O~~.
Os SEATO~~N OSHUflLfO~LAD 0168EATI016BEATZO~~~ O~~~G OOISCOO~~~:
00000000
, , 3 . . 6 7 8
"" 'EC' 7EC' NO7E0"'" OR!JUS APC ""SPOSE EXTSEO
P.c><AHGE"""" """ "'" """"
NORMAL: In this mode,~his instrument is used
as a sound generator, and performance data can
be received independently for all parts for which
a basic channel is assigned. When the AUTO
PLAY CHORD is on, the chord progression is
controlled by data for the LEFT part.
The maximum number of notes which can sound
simultaneously for each part is as follows:
SINGLE: Note on/off data is received only for the
basic channel assigned to the RIGHT part. The
note on/off data is controlled by this instrument's
AUTO PLAY CHORD and PLAY MODE settings.
P-CHANGEMODE
You can match the sound change data when
transmitting/receiving between different Technics
instruments.
1. Use the MIDI button to select OTHERS.
2. In the RHYTHM SELECT section, use the three
P-CHANGE MODE buttons (NORMAL, TEC 1
and TEC 2) to select the type of data-matching.
RHYTHM SELECT
OMARCHOCOOlITRY0 WALTZ0 SWING10 SWING2OOIXIE O~~~~ZOLATINIOLATIN2O~~~A'
OSSEATO~~'NC).S!iUfFLEO:~~A()016BEATI 016BEAT2O~~~~ o~~~~GOOISCOO~~~:
00000
A . 6 7 8
QNlY OR APC YR"SPOSE EXTSEO I
~ """'"
NORMAL: The program change numbers cor-
respond to the order of the sounds as they are
lined up from left to right, with the bottom row
being program change numbers 0-9.
TEC 1: Program change numbers are stand-
ardized among all Technics models which are set
to this mode: the program change number as-
signed to a given sound on one model is assigned
to the same sound on all models set to the same
mode.
TEC 2: Program change numbers correspond to
those on Technics SX-PR Series Digital En-
semble Piano.
46
RIGHT
32
LEFT 32
The maximum num-
ACCOMP 1
8
ber of notes for all
ACCOMP 2 8
parts combined is
32.
ACCOMP 3
8
BASS 8
DRUMS 8
To Next Page
Loading...
Need help?
General
