POWER REQUIREMENT 100W
110W (NORTH AMERICA AND
MEXICO)
AC120/ 220/ 230-240V 50/ 60Hz
AC120V 60Hz (NORTH
AMERICA AND MEXICO)
AC230-240V 50/ 60Hz (EUROPE,
AUSTRALIA, ANDNEW
ZEALAND)
DIMENSIONES (W×H×D) 140.4cm×102.5cm×48.1cm
(55-9/32”×40-11/32”×18-15/16”)
NET WEIGHT 46kg (101.4lbs)
ACCESSORIES AC CORD, MUSIC STAND
1. Warning
To prevent the risk of fire, smoke, or electrical shock and to ensure safe operation, please be
sure to follow the safety guidelines below.
1. At places where special caution is required, the necessary safety
precautions are clearly labeled or printed, for example, on the
cabinet, or on the part concerned. Please follow these safety
precautions, and also those listed in the Owner'sManual.
2. Parts which have a ; mark in the circuit diagram or in the parts
list are essential for safety. When replacing these parts, be sure to
use onlythe specified parts.
3. Use the specified types for internal wiring (double-insulated
wiring, etc.).
4. When replacing parts on the AC primary side (power transformer,
electric switch, electrical cord, noise-prevention condenser, etc.),
wind the lead wire and secure it by soldering.
5. Do not let the wiring come into contact with heat-emitting devices
(fuse resistor, radiator plate, etc.).
6. When replacing the wiring, make sure that it is not in contact with
3
To Next Page
Loading...
Need help?
General
