Setting the effects for each sound
The DIGITAL EFFECT, BRILLIANCE and DIGITAL
REVERB are stored independently for each sound.
When a SOUND button is pressed, the effect
settings for the selected sound are recalled.
Sustain pedal
The right pedal allows you to use sustain.
When a key is released while this pedal is
depressed, the sound is sustained so that it
lingers and slowly fades out.
• String resonance is added to some sounds.
METRONOMETEMPO
VALUE
VOLUME
BEAT
START/STOP RECORD
TRACK 1
SEQUENCER
TRACK 2
TRANSPOSE
DOWN UP
TOUCH SENSITIVITY
LIGHT
NORMAL
HEAVY
(PX664)
SEQUENCER
Record your performance and have it
automatically played back.
Display
The display shows a variety of different
setting values, and also the SEQUENCER
and METRONOME tempos.
• During normal playing, it is turned off.
TOUCH SENSITIVITY
The keyboard touch (Touch Response)
can be changed to match your type of
playing.
• Choose from LIGHT, NORMAL and
HEAVY.
BRILLIANCE
The BRILLIANCE allows you to select the
brightness of the sound from 5 settings.
If either of the buttons is pressed once, the current
setting value will appear on the display, and it can
then be changed.
Pressing the BRIGHT button increases the
brightness; when the MELLOW button is pressed,
the sound becomes mellower. During setting the
brightness is shown on the display (-2 to 2).
• Press both buttons at the same time to return the
brightness to 0.
• A short time after the setting is completed, the
display will return to the turned-off condition.
• If the BRILLIANCE has been set to a number
other than 0, one of the indicators remains lit.
To Previous Page
Loading...
