Start, End and Date field data are entered using number keys. Current time and date are shown on the lower-right
part of the screen to help you.
After the desired detail fields are filled, one can turn back to the timer info summary list by pressing “OK” to save
the settings, or by pressing “Menu” to cancel these new settings. A set timer is cancelled (disabled) by changing
the mode to “Inactive” in timer summary list. When a timer start time comes, the Set-Top-Box switches to the set
channel, then when the end time is reached, the box goes to it’s last state.
5.5. LANGUAGE
In this menu the user can adjust the preferred language. Language is changed
by pressing “5/6” and SELECT key.
6. ADVANCED OPERATION
6.1. ELECTRONIC PROGRAMME GUIDE (7 DAYS EPG)
In no menu mode, EPG Menu is reached by pressing GUIDE
key, quit by pressing GUIDE key again. In EPG Menu all
channels are displayed. Current programme is highlighted. Use
“5/6” buttons to change channels.
Some, but not all, channels send information about the current
and next events. Please note that event information is updated
automatically. If there is no event information data available in
channels, only channel names with “No Information” banner is
displayed.
In EPG Menu, you can easily see the extended help information
by pressing INFO key and by pressing this key again you can
close this window. If you highlight an event, short event
description, extended event description, start and finish times of
event are displayed on the screen.
When the current programme is highlighted, the box is switched
to the highlighted channel by pressing SELECT key.
If you press SELECT when a next event is highlighted, a
reminder is set for the highlighted programme and a clock
appears on the screen. Programme reminders can be set to
signal that a programme is about to start when you are
watching another channel. If you set reminder to a programme,
then you will be asked for switching to that channel when the
reminder time is reached.
To Next Page
Loading...
General