Press MENU to view the 7 day EPG. Press “5/6” to navigate
in Channels or Programmes. “3/4”key to navigate through the
channel and programme list. With RED/GREEN keys you can
change schedule time. By pressing YELLOW/BLUE you can
advance the schedule backward/ forward of a day. If you press
info key you can see easily the detailed help information and by
pressing info key again you can exit Help menu.
The starting time for EPG is the current time. You can see the
event information for the next two hours. By pressing “5/6”
key, you can go to the next/previous hours. If you press
SELECT when a next event is highlighted, a reminder is set for
the highlighted programme and a clock appears on the screen.
Programme reminders can be set to signal that a programme is
about to start when you are watching another channel. If you set
reminder to a programme, then you will be asked for switching
to that channel when the reminder time is reached.
6.2. MESSAGES
When the box receives no signal (e.g. the antenna cable is disconnected), “NO
SIGNAL” message is seen on the screen.
When there is no channel stored in the box, Timer Menu, Channel Table Menus are not accessible. Channel
navigation is not allowed. Therefore, trying to enter these menus or do channel navigation will display a warning
message on the screen.
To Next Page
Loading...
General