REAR PANEL:
35021962
TV VCR
AC IN
~
ANT. IN ANT. OUT
ANTENNA
IN
ANTENNA
OUT
TV SCART
VCR SCART
POWER
SUPPLY
3. PREPARING
3.1. REMOTE CONTROL
First open the battery cover on the underside of the remote control. Put in both batteries 1.5Volt (RO3/AAA)
referring to the imprinted symbols (+/-) in the battery case and put on the battery cover again. While using the
remote control, direct it towards the front side of the receiver. If the remote control does not work or the chosen
function does not work, the batteries are most probably exhausted and they should be replaced as soon as
possible. Please use only the leak proof batteries. It is best to remove the batteries from the remote unit if you will
not be using the remote control unit for long time.
To Next Page
Loading...
General