LCD TV Receiver LCD19HDID-407W
18
Adjust Menu (PC only)
This menu allows you to adjust the picture received from
a PC.
AUTO SYNC – Automatically adjusts the clock positioning
frequency and phase parameters.
PHASE – Allows you to remove any horizontal distortion
and sharpen the image by adjusting the phase.
CLOCK – Allows you to adjust the clock speed to match
the PC input source.
H.POSITION – Allows you to adjust the horizontal picture
position.
V.POSITION – Allows you to adjust the vertical picture position.
USING TELETEXT
Teletext is an information system that displays text on your TV screen. Using the teletext control
buttons you can view pages of information that are listed in the teletext index.
Note: No on-screen menus can be displayed in text mode. The contrast, brightness and colour
cannot be changed but the volume control is still available.
Note: Make sure the TV channel you are watching transmits teletext.
To Enter Text Mode
1. Press the TEXT button. The text page will appear, normally the INDEX page.
2. Press the TEXT button again. The screen will return to the channel you were watching.
To Select a Page of Text
1. Find the number of the page you require on the INDEX page and enter the page number using
the numeric buttons. The number of the page will appear in the top left hand corner of the
screen. The page counter will search for your page. When it fi nds it, the page will be displayed.
2. Press the INDEX button to return to the INDEX page or press the TEXT button to exit Teletext.
Fast Text
At the bottom of the teletext screen is a row of subject headings in red, green, yellow and blue.
1. Press the coloured FAST TEXT buttons on the remote control to access these pages.
2. Press the INDEX button to return to the INDEX page.
AUTO SYNC
PHASE
0
CLOCK
0
H.POSITION 0
V.POSITION
0
ADJUST
LCD19HDID-407W.indd Sec1:18LCD19HDID-407W.indd Sec1:18 14/11/2007 16:01:0414/11/2007 16:01:04
To Next Page
Loading...
Need help?
General