to select PressLight Frequency. OK.
Mains current -it rises and falls. Even ordinary lights flicker but withalternates
fluorescent lighting flicker is much more noticeable. This setting enables you
to compensate for indoor lighting. UK mains has a frequency of 50Hz.
to toggle between and50Hz 60Hz(UK frequency) (US etc.)
Loght Freq.
Default Setting
System Info
Lig
t Frequency
The Default Setting
to select PressDefault Setting. OK.
This feature allows you to return the camera to
the setup it had when it left the factory. If there
is difficulty accessing some functions or the
camera responds erratically, restoring the
factory defaults will usually solve the problem.
Press to proceed and return to Setup orOK
Press to cancel and return to Setup.MENU
System Info
Press to select PressSystem Info. OK.
The software version will be displayed
Press OK
This action will return you to the Date and Time Setting at the head of the
Setup screen.
To exit the Setup Screen: MODEPress the button.
PC Cam
5 MIN
50
5 MIN
OK
5050
Restore default
System settings
Continue?
OK
OK
5050
O7.01.23.01
Press
Press
50 60
Press
Yes OK No MENU
28
Press to confirm and return to the list of items
Press to confirm and exit Setup.MODE
Altering the Screen Display
The screen display has three modes
When the camera is switched on the appears.normal mode
Normal Mode displays the image on screen and all the relevant icons
• Press the DISPLAY button once
The icons will clear but the picture subject will remain.
• Press the DISPLAY button once more
The screen will be blanked out but the camera is still operational.
If you press the shutter, the camera will take the picture. After processing, the
shot will briefly be displayed after which time the screen will go blank again.
This mode of operation can be useful
• When you want to preserve battery life
• When you want to leave the camera switched on so that it is ready to take a quick shot
• In very bright sunlight
• Press the DISPLAY button a third time to restore normal mode.
2M 0354