EasyManuals Logo

TechniSat AUDIOMASTER MR2 User Manual

TechniSat AUDIOMASTER MR2
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
EN
FR
IT
NL
NW
DK
PL
CZ
SK
In the event of a thunderstorm, disconnect the device from the mains. Overvoltage can damage the device.
In the event of an obvious fault with the device, emanation of odour or smoke, substantial malfunctions,
damage to the housing or fluid ingress, immediately switch off the device and contact the Service
department.
The power supply unit may only be connected to a mains voltage of 100V-240V~, 50/60 Hz.
Never try to operate the device with another voltage.
The power supply unit must not be connected until the installation has been completed according to
regulations.
Do not operate the device if the power supply unit is defective or if the device is damaged in any other way.
When removing the power supply unit from the power outlet, pull on the plug, not the cable.
Do not put the device into operation in the vicinity of baths, swimming pools or splashing water.
Never try to repair a faulty device yourself. Always contact one of our customer service locations.
Foreign bodies, e.g. nails, coins, etc., must not be allowed to fall inside the device. Do not touch the
connection contacts with metal objects or fingers. This could lead to short-circuits.
Do not place any open flames such as burning candles on the device.
Never allow children to use the device unsupervised.
Even when switched off and on standby, the device is still connected to the mains power supply. If you
do not intend to use the device for a prolonged period, remove the mains plug from the power outlet.
Only pull on the plug, not on the cable.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat AUDIOMASTER MR2 and is the answer not in the manual?

TechniSat AUDIOMASTER MR2 Specifications

General IconGeneral
TypeHome audio micro system
Product colorBlack, Silver
CertificationCE
Recommended usageUniversal
Card reader integratedNo
Multi-Room Streaming (MRS) supportYes
Speaker type-
Number of drivers2
Speaker enclosureClosed
Speaker placementTabletop/bookshelf, Wall-mountable
Audio output channels1.0 channels
DC input voltage18 V
Mobile operating systems supportedAndroid, iOS
Power source typeAC
Connectivity technologyWired & Wireless
RMS rated power60 W
Current2.6 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)1.6 W
Weight and Dimensions IconWeight and Dimensions
Depth127 mm
Width290 mm
Height190 mm
Weight2900 g
Package depth185 mm
Package width350 mm
Package height260 mm
Package weight3800 g

Related product manuals