EasyManuals Logo

TechniSat AUDIOMASTER MR2 User Manual

TechniSat AUDIOMASTER MR2
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
EN
FR
IT
NL
NW
DK
PL
CZ
SK
3 Seing up the device
> Place the device on a firm, secure and horizontal base. Make sure the area is well ventilated.
Caution!
> Do not place the radio on so surfaces such as carpets and blankets or near to curtains and wall
hangings. These could obstruct the ventilation openings. The necessary flow of air could be interrupted
as a result. This could potentially lead to fire in the device.
> The ventilation slots at the rear and the sides must always be unobstructed. They must not be
obstructed by curtains, blankets or newspapers.
> Do not place the device near to sources of heat, such as radiators. Avoid direct sunlight and very dusty
environments.
> Do not select a location for the device with high air humidity, e.g. a kitchen or sauna, as the precipitation
of condensation water could damage the device. The device is intended for use in a dry environment
and in a moderate climate and must not be exposed to dripping or splashing water.
> Please note that the device footings could leave coloured marks on some types of furniture surfaces in
certain situations. Place a protective layer between your furniture and the device.
> You may only operate the device in a vertical position. Do not use outdoors!
> Do not place any heavy objects on the device.
> If you move the device from a cold environment to a hot environment, moisture could accumulate inside
the device. In such cases, wait approximately one hour before puing it into operation.
> Lay the mains cable in such a way that nobody can trip over it.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat AUDIOMASTER MR2 and is the answer not in the manual?

TechniSat AUDIOMASTER MR2 Specifications

General IconGeneral
TypeHome audio micro system
Product colorBlack, Silver
CertificationCE
Recommended usageUniversal
Card reader integratedNo
Multi-Room Streaming (MRS) supportYes
Speaker type-
Number of drivers2
Speaker enclosureClosed
Speaker placementTabletop/bookshelf, Wall-mountable
Audio output channels1.0 channels
DC input voltage18 V
Mobile operating systems supportedAndroid, iOS
Power source typeAC
Connectivity technologyWired & Wireless
RMS rated power60 W
Current2.6 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)1.6 W
Weight and Dimensions IconWeight and Dimensions
Depth127 mm
Width290 mm
Height190 mm
Weight2900 g
Package depth185 mm
Package width350 mm
Package height260 mm
Package weight3800 g

Related product manuals