7
> Select the program that you want to add to the list with the up and down arrow keys.
> By pressing the yellow function key “Add” the selected program will be added to the favorites list.
Block selection
In order to select multiple programs at once, use the following method:
By pressing the “OK” key the selection mode is started. The selected program is marked with an
“x” on the left side.
> Using the up and down arrow keys, the following or previous programs can also be selected.
> After you have selected the programs in this way, press the yellow function key “Add” in
order to add the selected programs to the favorites list.
Removing programs
In order to remove programs from the favorites list, start the program list management. You are
now in the favorites list.
> Press the blue function key “Functions”. A selection window with the available functions
appears.
> Select the line “Remove” with the up and down arrow keys.
> Confirm with “OK”.
> Select the program that you want to remove from the list with the up and down arrow keys.
> Press the yellow function key “Remove”. The message “Remove program(s) from the list?”
appears.
> Select yes or no with the right and left arrow keys.
> Confirm your selection with “OK”.
In this way, removed programs are still in the whole list and can always be added back to the
favorites list.
Erasure from the whole list
In order to remove programs from the whole list use the method described above. Switch to the
whole list after starting the program list management by pressing the red function key, “Programs”,
and then choose the function “Remove”.
Sort programs
In order to change the order of the programs in your favorites list according to your wishes, start
the program list management. You are now in the favorites list.
> Press the blue function key, “Functions.” A window with available functions appears:
> Select “Sort Line” with the up and down arrow keys.
> Confirm with “OK.”
> Select the program that you want in another position in the list with the up and down arrow keys.
> Press the yellow function key, “Sort.” A double arrow appears next to the selected program.
> Now you can move the selected program with the help of the up and down arrow keys and/or
number pad to the place in the list where you want the program to be.
> By pressing the yellow function key, “Sort,” the program is saved in the new position.
Ending the menu
By pressing the TV/Radio key, you are returning to normal operation mode.
Start electronic program magazine
> Press the SFI/EPG key on the remote control of the digital receiver.
The electronic program magazine appears on the screen. Here, the programs that you have selected
or the factory settings, with the current content, are shown. Now you can inform yourself about
the content of different programs through the EPG function. EPG functions are also available, for
example, choosing a particular program, setting a particular program, or setting the recording timer.
EN
To Next Page
Loading...
Need help?
General
