Why a second encrypted channel will not play on TechniSat TV Receiver?
If a second encrypted channel will not play on your TechniSat TV Receiver, the two selected channels may not be on the same transponder; select two channels that are on the same transponder. Also, the CI dual decryption may not be switched on; switch on CI dual decryption. The CI-/CI+ module used may not be Dual Decrypt compatible; use a "Dual Decrypt" compatible module.
What to do if my TechniSat TV Receiver has no picture or sound but the display is on?
If your TechniSat TV Receiver has no picture or sound but the display is on, it could be due to a short circuit in the LNB connection. Switch off the receiver, resolve the short circuit, and then switch the receiver back on. Another cause could be a faulty or missing cable connection, so check all cable connections. The LNB itself may be defective and need replacement. Ensure that you have installed the correct external unit at the receiver; if not, correct the settings. Also, make sure your antenna is correctly adjusted.
Why my TechniSat TV Receiver cannot receive channels that were previously being received?
If your TechniSat TV Receiver suddenly cannot receive channels it previously received, the antenna may be defective or not correctly adjusted; check the antenna. Alternatively, the channel may have been transferred to a different transponder, so run a channel search.
What to do if TechniSat TV Receiver has no picture, no sound, and the display is not on?
If your TechniSat TV Receiver has no picture, no sound, and the display is off, the problem is likely due to no mains voltage. Check the mains adapter and plug.
How to troubleshoot no picture via HDMI on TechniSat TV Receiver?
If you're getting no picture via HDMI on your TechniSat TV Receiver, the HDMI resolution being used might not be supported by your TV. Try modifying the HDMI resolution for the correct device or connect via a Scart lead.
Why are DVR recordings not displayed on my TechniSat TV Receiver?
If DVR recordings are not displayed on your TechniSat TV Receiver, connect the configured storage medium. You may also need to modify the setting for the storage medium.
How to troubleshoot TechniSat TV Receiver when PC will not connect to device or device will not connect to network?
If your PC won't connect to the device or the device won't connect to the network, it may be due to wrong network settings. Check the network settings. Also, check the network cable connection to ensure it is correctly connected.
Why is text hard to read on TechniSat TV Receiver Infobox?
If the text in the Infobox or SFIplus detailed information is hard to read at a distance on your TechniSat TV Receiver, the character size may be set to "small". Correct the settings.
Why are various channels not shown in TechniSat TV Receiver channel list?
If various channels are not shown in your TechniSat TV Receiver channel list, a wrong channel list may be selected. Select a different channel list.
Why is there no sound or wrong audio playing on my TechniSat TV Receiver?
If there is no sound or the wrong audio playing on your TechniSat TV Receiver, Dolby Digital might be active, or the wrong audio language may be selected. Check the setting in the menu. Also, check Dolby Digital/language selection.
Essential safety precautions for operating the digital receiver to prevent hazards and damage.
Connecting antenna signals and configuring external unit operations.
Guide to the automatic installation process for setting up the receiver.
Configuring basic settings like country, picture format, and antenna signals.
Detailed settings for adapting the receiver to antenna setup.
Checking and setting up the receiver's network connection.
Information on checking for and installing new software versions.
Methods for searching for channels and updating the channel list.
Downloading Electronic Programme Guide (EPG) data for programme information.
Accessing and navigating the main menu and submenus.
Navigating and choosing channels using various input methods.
Browsing and selecting channels from the on-screen list.
Inserting smartcards or CI/CI+ modules for encrypted content.
Setting up various timer functions for recording programmes.
Overview of instant, timer-controlled, and timeshift recording.
Starting immediate recording of the current programme.
Enabling time-shifted viewing by recording and playing simultaneously.
Accessing and starting playback of recorded content.
Addressing issues with receiving channels, snow, and no signal.
Solutions for antenna adjustment, LNB defects, and rotation problems.
Troubleshooting when the receiver cannot be operated or is blocked.
Step-by-step guide for registering products and claiming warranty.
Conditions for invoking warranty, including registration and issue resolution.
General| Signal source | Satellite |
|---|---|
| Digital signal format system | DVB-S, DVB-S2 |
| Personal Video Recorder (PVR) included | - |
| Tuner type | Digital |
| Product color | Silver |
| Number of tuners | 2 tuner(s) |
| Channels quantity | 10000 channels |
| Audio output channels | - channels |
| Favorite list TV programs | 10000 |
| Digital Satellite Equipment Control (DiSEqC) | 1.0, 1.2, Sat-CR |
| Audio formats supported | FLAC, M4A, MP2, MP3, OGG, WAV |
| Image formats supported | BMP, GIF, JPG, PNG, TIF |
| Video formats supported | ASF, AVI, H.264, MKV, MOV, MP4, MPEG1, MPEG2, MPEG4, MPG, TS, TS4, VOB, WMV |
| Built-in HDD | No |
| USB 2.0 ports quantity | 3 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 13 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 10 - 75 % |
| Display type | VFD |
To Next Page
