TechniSat Digit ISIO S2 User Manual

36
> Select Save to save the recording, or Discard not to save the recording, or Back
to continue with the recording.
8.4 Automatically end recording
Option 1
> Press the On/Standby button. A request is now displayed asking what should happen
to the recording in progress.
> Select the line with the option you want.
8.5 DVR playback
You can access DVR recordings via the DVR Navigator.
8.5.1 Calling up the DVR Navigator/Starting DVR playback
The DVR Navigator can be called up in the following ways. Depending on whether you are
currently in TV or radio mode, a list will appear of the existing TV or radio recordings on
an inserted USB memory device or an inserted SD/MMC card or an available network drive.
When doing so pay careful attention to the information and settings for global and user-
dependent parental control under section 15.2.
The broadcast information can be displayed and hidden by pressing the Info button
repeatedly.
> You can start to play back a recording by highlighting it and confirming with OK.

TechniSat Digit ISIO S2 Specifications

General

Signal source	Satellite
Digital signal format system	DVB-S, DVB-S2
Personal Video Recorder (PVR) included	-
Tuner type	Digital
Product color	Silver
Number of tuners	2 tuner(s)
Channels quantity	10000 channels
Audio output channels	- channels
Favorite list TV programs	10000
Digital Satellite Equipment Control (DiSEqC)	1.0, 1.2, Sat-CR
Audio formats supported	FLAC, M4A, MP2, MP3, OGG, WAV
Image formats supported	BMP, GIF, JPG, PNG, TIF
Video formats supported	ASF, AVI, H.264, MKV, MOV, MP4, MPEG1, MPEG2, MPEG4, MPG, TS, TS4, VOB, WMV
Built-in HDD	No
USB 2.0 ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	13 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
Display type	VFD