TechniSat Digit ISIO S2 User Manual

38
8.5.7 Setting tags
> Skip as described above to a location in the recording where you want to add a tag.
> Pressing the Record button sets a tag at the selected location.
Tags can also be set or edited manually or automatically during recording
(section 9.1.4) and in the DVR recordings menu (section 10.1.3.2), where this is
enabled in automatic programme tagging (section 10.5.4).
8.5.8 Skipping to tags
During playback you have the option of navigating directly to locations in the recording where
you have set tags.
> Using the Tag menu item in the Options selection, select the tag to skip to the
location you want in the recording.
8.5.9 Ending playback
> Press the Stop button to end playback.
Playback will end and your receiver will return to normal mode. In doing so the receiver
"remembers" the place in the recording where playback ended. If you start playing this
recording again, it will automatically resume at the point where you previously left off.

TechniSat Digit ISIO S2 Specifications

General

Signal source	Satellite
Digital signal format system	DVB-S, DVB-S2
Personal Video Recorder (PVR) included	-
Tuner type	Digital
Product color	Silver
Number of tuners	2 tuner(s)
Channels quantity	10000 channels
Audio output channels	- channels
Favorite list TV programs	10000
Digital Satellite Equipment Control (DiSEqC)	1.0, 1.2, Sat-CR
Audio formats supported	FLAC, M4A, MP2, MP3, OGG, WAV
Image formats supported	BMP, GIF, JPG, PNG, TIF
Video formats supported	ASF, AVI, H.264, MKV, MOV, MP4, MPEG1, MPEG2, MPEG4, MPG, TS, TS4, VOB, WMV
Built-in HDD	No
USB 2.0 ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	13 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
Display type	VFD