TechniSat Digit ISIO S2 User Manual

20
> If you do not want to wait for the EPG data to download, you can skip the process by
pressing the Info button.
The EPG data will then be automatically updated the following night, or you can update
it manually at any time.
If you have skipped the EPG update, your device will automatically download the EPG
data at the time set in section 14.2, as long as automatic EPG updating is kept active
(section 14.1) and the device is also in standby mode at this time.
You can also run the update manually at any time (section 14.6).
Product registration
In this step you can register your product.
By doing so you will secure a warranty of up to 3 years. By registering your product with
TechniSat, you will receive an additional one year of warranty claim from the date of
purchase, as well as the two-year warranty claim under law. Your legal rights are not affected
by this.
You will need an Internet connection to do so.
Exiting the installation wizard
Confirm the final message from the installation assistant by pressing the OK button.

TechniSat Digit ISIO S2 Specifications

General

Signal source	Satellite
Digital signal format system	DVB-S, DVB-S2
Personal Video Recorder (PVR) included	-
Tuner type	Digital
Product color	Silver
Number of tuners	2 tuner(s)
Channels quantity	10000 channels
Audio output channels	- channels
Favorite list TV programs	10000
Digital Satellite Equipment Control (DiSEqC)	1.0, 1.2, Sat-CR
Audio formats supported	FLAC, M4A, MP2, MP3, OGG, WAV
Image formats supported	BMP, GIF, JPG, PNG, TIF
Video formats supported	ASF, AVI, H.264, MKV, MOV, MP4, MPEG1, MPEG2, MPEG4, MPG, TS, TS4, VOB, WMV
Built-in HDD	No
USB 2.0 ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	13 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
Display type	VFD