TechniSat Digit ISIO S2 User Manual

8
4 Connecting the DVB receiver
a. Mains connection
b. LNB 1 connection to the LNB Input 1 on the DVB receiver.
(Please note that the LNB must be connected with LNB Input1 when operating with
an antenna signal.)
c. LNB 2 connection to the LNB Input 2 on the DVB receiver.
d. HDMI connection from the DVB receiver to the TV.
e. Connecting the audio outputs to a hi-fi/surround sound system.
f Connecting the DVB receiver to the network/Internet.

TechniSat Digit ISIO S2 Specifications

General

Signal source	Satellite
Digital signal format system	DVB-S, DVB-S2
Personal Video Recorder (PVR) included	-
Tuner type	Digital
Product color	Silver
Number of tuners	2 tuner(s)
Channels quantity	10000 channels
Audio output channels	- channels
Favorite list TV programs	10000
Digital Satellite Equipment Control (DiSEqC)	1.0, 1.2, Sat-CR
Audio formats supported	FLAC, M4A, MP2, MP3, OGG, WAV
Image formats supported	BMP, GIF, JPG, PNG, TIF
Video formats supported	ASF, AVI, H.264, MKV, MOV, MP4, MPEG1, MPEG2, MPEG4, MPG, TS, TS4, VOB, WMV
Built-in HDD	No
USB 2.0 ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	13 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
Display type	VFD