TechniSat Digit ISIO S2 User Manual

34
7.12 Selecting a function
> You can open the Navigation menu (NAV menu) to select the function you want
by pressing the Navigator/function selection button.
> Use the up/down arrow buttons to highlight the function you want to access.
TV: TV mode: playing TV programmes.
Radio: Radio mode: playing radio programmes.
Internet: Internet mode: calls up the web links available in the Internet list.
Film/DVR: Film/DVR Navigator: access video files stored on a device connected
to the USB port or on a shared network drive or available via UPhP
(section 8.18).
Music: Music navigator: access MP3 titles stored on a device connected
to the USB port or on a shared network drive or available via UPhP
(section 8.19).
Pictures: Pictures navigator: access JPEG files stored on the internal hard disk,
on a connected USB device or on a shared network drive or available
via UPhP (section 8.20).
> Confirm with OK to select the highlighted function.
When doing so pay careful attention to the information and settings for global and user-
dependent parental control under section 15.
7.13 Using the Internet list to call up websites
> From normal mode press the WWW button twice
or:
> If a website has already been opened, press the WWW button once.
The Internet List Navigator now appears. The web link last called up is highlighted.

TechniSat Digit ISIO S2 Specifications

General

Signal source	Satellite
Digital signal format system	DVB-S, DVB-S2
Personal Video Recorder (PVR) included	-
Tuner type	Digital
Product color	Silver
Number of tuners	2 tuner(s)
Channels quantity	10000 channels
Audio output channels	- channels
Favorite list TV programs	10000
Digital Satellite Equipment Control (DiSEqC)	1.0, 1.2, Sat-CR
Audio formats supported	FLAC, M4A, MP2, MP3, OGG, WAV
Image formats supported	BMP, GIF, JPG, PNG, TIF
Video formats supported	ASF, AVI, H.264, MKV, MOV, MP4, MPEG1, MPEG2, MPEG4, MPG, TS, TS4, VOB, WMV
Built-in HDD	No
USB 2.0 ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	13 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
Display type	VFD