TechniSat Digit ISIO S2 User Manual

40
Fault Possible cause Solution
Cannot receive channels
that were previously being
received
Antenna defective or not
correctly adjusted
Check antenna
Channel transferred to a
different transponder
Run a search
(see section 16)
Channel no longer being
broadcast
None
Intermittent appearance of
square blocks in the picture.
Switches to freeze frame
intermittently, no sound.
Screen black at certain
times with the message
"no signal".
Heavy rain or snow Remove snow from dish
antenna
Antenna incorrectly adjusted Adjust antenna
Dish too small for your
location
Use larger antenna
Obstacle between dish and
satellite, e.g. a tree
Mount dish with clear line of
sight
No picture, no sound,
display on
Short circuit in LNB
connection
Switch off receiver, resolve
short circuit, switch receiver
back on
Faulty or missing cable
connection
Check all cable connections
(see section 4)
Defective LNB Replace LNB
Incorrect external unit
installed at receiver
Correct the settings
(see section 7.6)
Antenna incorrectly adjusted Adjust antenna
Antenna cannot be rotated Motor not compatible with
DiSEqC 1.2
Use a suitable motor
Time not displayed while in
standby mode
Time not acquired Play e.g. ZDF for approx.
30 sec.
Standby clock switched off Switch stand-by clock on
(see section 7.2.4)
Text in e.g. Infobox or
SFIplus detailed information
is hard to read at a distance
Character size set to "small" Correct the settings
(see section 7.7.7.1)

TechniSat Digit ISIO S2 Specifications

General

Signal source	Satellite
Digital signal format system	DVB-S, DVB-S2
Personal Video Recorder (PVR) included	-
Tuner type	Digital
Product color	Silver
Number of tuners	2 tuner(s)
Channels quantity	10000 channels
Audio output channels	- channels
Favorite list TV programs	10000
Digital Satellite Equipment Control (DiSEqC)	1.0, 1.2, Sat-CR
Audio formats supported	FLAC, M4A, MP2, MP3, OGG, WAV
Image formats supported	BMP, GIF, JPG, PNG, TIF
Video formats supported	ASF, AVI, H.264, MKV, MOV, MP4, MPEG1, MPEG2, MPEG4, MPG, TS, TS4, VOB, WMV
Built-in HDD	No
USB 2.0 ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	13 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
Display type	VFD