48
6.2.9 Deleting inactive stations
This menu item is for removing old stations and those no longer being received from
the station list.
> Open the MENU > [Scan seings] > [Deleting inactive stations] and press
the TUNING / SELECT knob to confirm.
This is followed by a prompt [Removes inactive stations. OK?], asking whether the
inactive stations are to be deleted.
> Using TUNING / SELECT knob, select the [Yes] item and confirm by pressing
the TUNING / SELECT knob.
7 FM mode
7.1 Switching on FM radio mode
> Switch to FM mode by pressing the MODE buon.
>
[FM] is shown on the display.
When you switch on the radio for the first time, the frequency is set to 87.50
MHz.
If you have already set or saved a station, the radio plays the last station set.
In the case of RDS stations, the station name is displayed.
Align the telescopic antenna to improve reception (Section 4.3.1).
7.2 FM reception with RDS information
RDS is a procedure for broadcasting additional information via FM stations.
Broadcasters with RDS broadcast their station name or the programme type, for
example. This is shown in the display. The device can show the RDS information RT
(Radio text), PS (Station name), PTY (Programme type).
7.3 Automatic station scan
> Push the TUNING / SELECT knob to automatically search for the next station
with sucient signal strength.
If an FM station with sucient signal strength is found, the scan stops and
the station is played. If an RDS station is being received, the station name is
displayed and, possibly, the radio text.
In order for the scan also to find weaker stations, deactivate the function scan
seings -> only strong stations under item 7.5.
To Next Page
Loading...
Need help?
General