TechniSat DIGITRADIO 602

66
The playback quality with MP3 CDs depends on the bit rate seing and the
burning soware used.
15.3 Playing CDs
> Switch to CD player mode by pressing the MODE buon.
>
[CD] is shown on the display.
> Insert the CD with the labelled side facing upwards. Ensure that the CD is not
positioned at an angle. The CD is automatically drawn in by the device.
> The data on the CD is scanned. [Reading] appears in the display. Playback
then begins with the first track (audio CD) or the first track in the first folder
(MP3 CD).
Do not perform any operation until the CD content has been completely read,
to ensure that all the required information on the CD has been read. This
process can take some time, particularly with MP3 CDs.
Please hold the CD by the edge when inserting/removing.
> By pressing the Play/Pause buon , you can pause playback (the playing
time flashes on the display), or continue playback by pressing it again.
> Use the Stop buon to stop playback. The total number of tracks
appears on the display.
Always stop playing a CD before removing it.
15.4 Picking a track
> Use the Previous Track or Next Track buons to skip to the next
or previous track.
The display shows the respective folder [F] and track [T] number.
15.5 Quick search
While the track is playing, you can perform a quick search forwards or backwards to
find a specific section.
> Hold down the Previous Track or Next Track buons to skip
forwards or backwards quickly within a track for as long as the buon is held
down.
15.6 Repeat function
You can select whether a track, the entire folder/album (only for mp3 CDs) or all of
the tracks on the CD are to be repeated.