TechniSat DIGITRADIO 602

67
DE
EN
FR
NL
DE
EN
FR
NL
> Press the Repeat buon several times.
The selected mode appears on the display using an icon (Repeat Track,
Repeat Album, Repeat All, Shue).
> To switch the function o again, press the Repeat track buon as oen as
required until the icon no longer appears.
16 Audio input
You can play sound on an external device via the DIGITRADIO 602 speaker.
> Connect the external device to the AUX-IN port (23, 3.5 mm stereo jack) on
the back.
> Use the MODE buon to select the audio input. [Aux-In] appears on the
display.
The playback is controlled on the external device. Do not set the volume too
low to prevent interference.
17 Other functions
17.1 Sleep function
> Press the MENU buon and then select [Main Menu > Sleep].
> You can use the  or  buons to set the period for Sleep o in 15, 30, 45
or 60 minute intervals, aer which the device switches to standby while in
any operating mode.
Alternatively:
> Press the SLEEP buon several times.
A clock symbol appears in the status bar of the display with the time still
available until the DIGITRADIO 602 switches to standby.
17.2 Alarm
> Press the MENU buon and then select [Main Menu > Alarm].
Alternatively:
Press the Alarm 1 or Alarm 2 buon to jump straight to alarm configuration.