EasyManuals Logo

TechniSat DIGITRADIO 602 User Manual

TechniSat DIGITRADIO 602
Go to English
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
68
17.2.1 Seing the alarm time
The alarm function cannot be operated until the correct time has been set.
Depending on the configuration, this either happens automatically or will need
to be set manually. The time can either be updated manually, via DAB/FM or
via the Internet. For more information on this, see Section 18.3.
> Select an alarm time memory Alarm 1 or Alarm 2 using the or buons
and confirm with OK.
Alternatively:
> Press the Alarm 1 or Alarm 2 buon to jump straight to alarm configuration.
> Then go through all the points one aer the other. Confirm each entry with
the OK buon.
Repeating
> You can choose between Daily (every day of the week), Once, Weekdays
(Mon - Fri) and Weekends (Sat and Sun). Press the OK buon to apply the
seing.
Time
> Here you can enter the alarm time and date (if required).
Using the / buons, first select the hours and press the OK buon to
save. Then enter the minutes. Accept this too by pressing the OK buon.
If Repeat > [Once] has been selected, you must also enter the date as well
as the time.
Mode
> You then enter the source. The available options are BUZZER, Internet Radio,
DAB+ or FM. Press the OK buon to accept the seing.
Station
> If you have selected Internet Radio, DAB+ or FM, you can then enter
whether or not you want to be woken up by the last station listened to or
by one from your Favourites list.
Volume
> Use the / buons to select the volume with which you wish to be woken
up.
Saving
> Press the OK buon to save the alarm.
The alarm is active as soon as you have set the alarm repeat to Daily, Once,
Weekend, or Workdays. The status bar shows an alarm symbol with the
corresponding number of the active alarm.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat DIGITRADIO 602 and is the answer not in the manual?

TechniSat DIGITRADIO 602 Specifications

General IconGeneral
Radio typeInternet
Tuner typeAnalog & digital
FM band range87.5 - 108 MHz
DAB band range174 - 240 MHz
Supported radio bandsDAB+, FM
Radio Data System (RDS)Yes
Frequency range25 - 18000 Hz
RMS rated power70 W
Number of built-in speakers2
Display typeOLED
Display diagonal2.7 \
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Headphone outputs1
Headphone connectivity3.5 mm
ProjectionNo
Antenna typeExternal
Product colorAnthracite, Silver
Volume controlRotary
Internet radio services supportedSpotify
On Screen Display (OSD) languagesDAN, DEU, DUT, ENG, ESP, FIN, FRE, ITA, NOR, POL, POR, SWE, TUR
Power sourceAC
AC input voltage230 V
DC input voltage18 V
AC input frequency50 Hz
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)5 - 90 %
Package depth267 mm
Package width470 mm
Package height263 mm
Package weight6200 g
Weight and Dimensions IconWeight and Dimensions
Depth215 mm
Width400 mm
Height170 mm
Weight4970 g

Related product manuals