EasyManua.ls Logo

TechniSat DIGITRADIO 650

TechniSat DIGITRADIO 650
172 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59
DE
EN
FR
NL
6.2 Aligning the antenna
The number and quality of broadcast stations depends on the reception
conditions at the location of the radio. Excellent reception can be achieved with
the telescopic antenna.
> Release the telescopic antenna (12) from its holder, align it and extend it.
Note:
- Precise alignment of the antenna is oen important, especially at the
outskirts of a DAB+ reception area. You can quickly find the location of the
nearest transmission tower online by visiting “www.dabplus.de”.
- Start the first scan at a window pointing in the direction of the transmission
mast. In bad weather, DAB+ reception may be limited.
- Do not touch the antenna during station playback. This could reduce the
reception and lead to sound drop-outs.
6.3 Connecting the mains adapter
WARNING!
Do not touch the mains plug with wet hands; electric shock hazard!
CAUTION!
Route the mains cable in such a way that nobody can trip over it.
Notes:
- Ensure that the operating voltage matches the local mains voltage before
inserting the mains plug into the wall socket.
- Use a suitable, easy-to-access mains connection and avoid using multiple
socket strips!
- In the case of malfunctions or detecting smoke or odour from the housing,
remove the plug from the power outlet immediately!
- Remove the plug if the device is not going to be used for a prolonged period,
e.g. before going away on a long trip.
> Insert the DC plug of the power supply unit into the socket labelled DC IN
(17) on the back of the DIGITRADIO 650.
> Insert the plug into a wall outlet.

Table of Contents

Related product manuals