81
DE
EN
FR
NL
20.7 Soware update
From time to time soware updates may be provided which can contain
enhancements or error fixes. This keeps the DIGITRADIO 650 permanently up-to-date.
> Press the MENU buon and then select [Main Menu] > [System Seings ]>
[Soware Update].
> Select [Auto Update] if the DIGITRADIO 650 should search for new soware
versions periodically.
> Select [Check now] if you want to check immediately whether a new
soware version is available.
If a soware update has been located, follow the instructions on the display.
In order to find soware updates and upload them, the DIGITRADIO 650
must be connected to the Internet. Do not switch the DIGITRADIO 650 o
during the update process!
20.8 Set-up wizard
> Press the MENU buon and then select [Main menu] > [System Seings] >
[Set-up wizard].
When switching on for the first time the set-up wizard starts automatically.
First select the language using / and confirm the selection with OK.
> As soon as [Run now] is shown on the display, select [YES], and confirm
with OK.
If you select [No], the wizard closes and you need to perform the required
seings manually.
You will be taken through the seings in various steps.
> Under [Time format], select the desired display format for the time display
(Section 20.4) and press the OK buon.
> In the next step you must select via which source the time and date is to be
synchronised (for more information refer to Section 20.4).
If you have selected [Update from the Net], you must then enter the time
zone and summer time/winter time.
Depending on the time and date seings, some of the network seings are now
performed.
> Select whether the WiFi connection should remain active in standby mode as
well. Press the OK buon.