80
20.4 Time seings
> Press the MENU buon and then select [Main menu] > [System Seings] >
[Time and Date].
> Select [Time/Date Seing] to set the time and date manually.
Use the OK buon to select a value. Change it using the or buons.
> Confirm by pressing OK.
> Select [Update seing] to determine whether the time update should be
automatic via DAB, FM or Internet or whether you would like to enter it manually.
> To do this, select [DAB+ update], [FM update], [NETupdate] or [No
update].
> Under the [Time format seing] option you can activate 12 or 24 hour
format. Confirm your selection with the OK buon.
> Under [Set time zone], select the current time zone in your location and,
under [Summertime] you determine whether summertime should currently
be active. This seing is displayed only if you have previously selected NET
update under the update seings.
20.5 Language
> Press the MENU buon and then select [Main menu] > [System Seings] >
[Language].
> Using or , select one of the available Menu languages and confirm by
pressing OK.
20.6 Factory seings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations may no longer be received. In this case you can reset the device
to factory seings to delete all the saved stations and then launch a new scan.
> Press the MENU buon and then select [Main menu] > [System Seings] >
[Factory seings].
> Confirm by pressing OK.
> Use or to select > YES and confirm the confirmation prompt by
pressing OK.
All previously stored stations and seings will now be deleted. Aer reseing,
you can start the set-up wizard (Section 20.8).