EasyManua.ls Logo

TechniSat MULTYRADIO 600 CD IR - Page 72

TechniSat MULTYRADIO 600 CD IR
88 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
72
14.2 Pairing
> Activate Bluetooth on your music player, e.g. a smartphone or tablet.
If you activate Bluetooth on your music player, please consult the
corresponding instruction manual for the device which you wish to pair with
the MULTYRADIO 600 CD IR.
Please note that only 1 device can be connected to the MULTYRADIO 600 CD
IR at any one time.
Ensure that you do not exceed the maximum Bluetooth range of 10 metres
to guarantee excellent playback quality.
> Select the list of Bluetooth devices found on your music player.
> In the list, search for the item MULTYRADIO 600 CD IR and select it. If the
selection requires a PIN, enter "0000" (4 x zero).
> If pairing is successful, the [BT] symbol in the MULTYRADIO 600 CD IR display
stops flashing.
14.3 Playing music
> Select a music track on your music player and play it.
> The sound is now played via the MULTYRADIO 600 CD IR.
You can use the Play buons on the MULTYRADIO 600 CD IR remote control
to control the playback on your music player (only on compatible devices).
Play/Pause.
Next track.
Press 2x for previous track, press 1x to play the track from the beginning:
Stop playback.
Ensure that the volume on your music player is not set too low.
15 Audio/Playing MP3 CDs
15.1 General information on CDs/MP3 CDs
The MULTYRADIO 600 CD IR is designed for music CDs that contain audio data (CD-DA
or MP3 for CD-R and CD-RW). MP3 formats must be generated with ISO 9660 Level
1 or Level 2. Multi-session CDs cannot be read.
In MP3 mode, the terms "Folder" = Album and "Track" are critical. “Album”
corresponds to the folder on the PC, and “Track” to the PC file or a CD-DA track.

Table of Contents

Related product manuals