What to do if TechniSat AUDIOMASTER MR1 does not connect to WLAN router?
If your TechniSat Radio isn't connecting to the WLAN router, ensure the router signal strength is adequate. Also, verify in the router settings that it accepts new connections. Finally, double-check the WLAN password and re-enter it to make sure it's correct.
What to do if there is no sound on TechniSat AUDIOMASTER MR1?
If you can't hear any sound on your TechniSat Radio, try increasing the volume. Also, ensure the playback device is on and its volume is turned up. It's also possible that the incorrect source has been selected.
How to fix TechniSat AUDIOMASTER MR1 Radio that will not switch on?
If your TechniSat Radio won't switch on, the issue might be with the power supply. Ensure the power supply unit is correctly connected both to the socket and to the device.
General| Product color | Aluminium, Black |
|---|---|
| Housing material | Aluminum |
| Recommended usage | - |
| Multi-Room Streaming (MRS) support | Yes |
| Speaker placement | Tabletop/bookshelf, Wall-mountable |
| Audio output channels | 1.0 channels |
| RMS rated power | 30 W |
| Connectivity technology | Wired & Wireless |
| Power consumption (standby) | 1.5 W |
| Power consumption (typical) | 36 W |
| Type | Home audio micro system |
Weight and Dimensions| Width | 110 mm |
|---|---|
| Height | 220 mm |
| Weight | 1360 g |
| Package depth | 200 mm |
| Package width | 265 mm |
| Package height | 165 mm |
| Package weight | 1920 g |
Essential safety guidelines to prevent device damage, injury, and ensure safe operation.
Ensuring proper placement, ventilation, avoiding heat/humidity, and protecting furniture.
Steps for connecting the power supply unit and ensuring correct voltage for safe operation.
Steps to connect the device to WLAN and configure the audio system via the app.
Procedure to put the device into SET-UP mode for initial network connection or re-configuration.
Steps to add devices to a multi-room group and assign names.
Adjusting volume for multi-room devices and configuring stereo mode for AUDIOMASTER MR1.
Procedure for pairing the AUDIOMASTER with external music sources via Bluetooth.
Table of common symptoms like device not turning on or no sound, with possible causes and remedies.
To Next Page