EasyManuals Logo

TechniSat AUDIOMASTER MR1 User Manual

TechniSat AUDIOMASTER MR1
Go to English
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
17
EN
FR
IT
NL
NW
DK
PL
CZ
SK
3 Seing up the device
> Place the device on a firm, secure and horizontal base. Make sure the area is well ventilated.
Caution!
> Do not place the radio on so surfaces such as carpets and blankets or near to curtains and wall
hangings. These could obstruct the ventilation openings. The necessary flow of air could be interrupted
as a result. This could potentially lead to fire in the device.
> The ventilation slots at the rear and the sides must always be unobstructed. They must not be
obstructed by curtains, blankets or newspapers.
> Do not place the device near to sources of heat, such as radiators. Avoid direct sunlight and very dusty
environments.
> Do not select a location for the device with high air humidity, e.g. a kitchen or sauna, as the precipitation
of condensation water could damage the device. The device is intended for use in a dry environment
and in a moderate climate and must not be exposed to dripping or splashing water.
> Please note that the device footings could leave coloured marks on some types of furniture surfaces in
certain situations. Place a protective layer between your furniture and the device.
> You may only operate the device in a vertical position. Do not use outdoors!
> Do not place any heavy objects on the device.
> If you move the device from a cold environment to a hot environment, moisture could accumulate inside
the device. In such cases, wait approximately one hour before puing it into operation.
> Lay the mains cable in such a way that nobody can trip over it.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat AUDIOMASTER MR1 and is the answer not in the manual?

TechniSat AUDIOMASTER MR1 Specifications

General IconGeneral
Product colorAluminium, Black
Housing materialAluminum
Recommended usage-
Multi-Room Streaming (MRS) supportYes
Speaker placementTabletop/bookshelf, Wall-mountable
Audio output channels1.0 channels
RMS rated power30 W
Connectivity technologyWired & Wireless
Power consumption (standby)1.5 W
Power consumption (typical)36 W
TypeHome audio micro system
Weight and Dimensions IconWeight and Dimensions
Width110 mm
Height220 mm
Weight1360 g
Package depth200 mm
Package width265 mm
Package height165 mm
Package weight1920 g

Related product manuals