EasyManua.ls Logo

TechniSat MULTYRADIO 600 CD IR - Page 74

TechniSat MULTYRADIO 600 CD IR
88 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74
> By pressing the Play/Pause buon , you can pause playback (the playing
time flashes on the display), or continue playback by pressing it again.
> Use the Stop buon to stop playback. The total number of tracks appears
on the display.
Always stop playing a CD before removing it.
> To eject a CD, press the Eject buon on the front panel in CD mode.
15.4 Picking a track
> Use the Previous Track or Next Track buons to skip to the next or
previous track.
The display shows the respective folder [F] and track [T] number.
> You can use the F+ and F- buons to select the folder on MP3 CDs.
15.5 Quick search
While the track is playing, you can perform a quick search forwards or backwards to
find a specific section.
> Hold down the Previous Track or Next Track buons to skip forwards
or backwards quickly within a track for as long as the buon is held down.
15.6 Repeat function
You can select whether a track, the entire folder/album (only for MP3 CDs) or all of
the tracks on the CD are to be repeated.
> Press the Repeat buon several times .
The selected mode appears on the display using an icon (Repeat Track,
Repeat Album, Repeat All, Shue).
> To switch the function o again, press the Repeat track buon as oen as
required until the icon no longer appears.
> Press the Shue buon to play the tracks in a random sequence.
15.7 Programming playback
You can programme up to 20 tracks on a CD in any sequence.
> Stop any playback in progress by pressing the STOP buon .
> Press the FAV buon on the remote control to access the programming
mode.
The display now shows [P01] for the first track to be programmed.

Table of Contents

Related product manuals